Shell thickening for extrusion-based ceramics printing

doi:10.1016/j.cag.2021.04.031

IOCAS-IR

	Shell thickening for extrusion-based ceramics printing
	Xing, Yu 1; Zhou, Yu 1; Yan, Xin 1,2; Zhao, Haisen 1; Liu, Wenqiang 1; Jiang, Jingbo 3; Lu, Lin 1
	2021-06-01
发表期刊	COMPUTERS & GRAPHICS-UK
ISSN	0097-8493
卷号	97 页码:160-169
通讯作者	Lu, Lin([email protected])
摘要	Additive manufacturing of ceramics gains increasing attention in recent years, as ceramic material like clay processes distinctive merits, including hardness, thermal and chemical stability, etc. The customer-level extrusion-based ceramics 3D printer is getting easily achievable. However, due to its semi-liquid and highly viscoelastic properties, the clay material causes new challenges to the computational aspects. It does not dry instantly and may collapse during the accumulated force from new layers breaks the moment equilibrium, especially when adjacent layers have less overlap region. We tackle this unique problem, focusing on shell-like models in extrusion-based ceramics printing in this paper. We propose a structural analysis algorithm that considers the moment equilibrium for each layer along the fabrication process. We also present a computational framework to enhance the structural stability by local thick-ening of the shell models without affecting the appearance. We demonstrate the printing process and physical results to validate our method. (c) 2021 Elsevier Ltd. All rights reserved.
关键词	Extrusion-based ceramics printing Structural analysis Shell thickening
DOI	10.1016/j.cag.2021.04.031
收录类别	SCI
语种	英语
资助项目	National Key Research and Development Program of China[2016YFC1401204]; NSFC[61972232]; Special Project of Science and Technology Innovation Base of Key Laboratory of Shandong Province for Software Engineering[11480004042015]
WOS研究方向	Computer Science
WOS类目	Computer Science, Software Engineering
WOS记录号	WOS:000661427000004
出版者	PERGAMON-ELSEVIER SCIENCE LTD
引用统计	被引频次：4[WOS] [WOS记录] [WOS相关记录]
文献类型	期刊论文
条目标识符	http://ir.qdio.ac.cn/handle/337002/176907
专题	中国科学院海洋研究所
通讯作者	Lu, Lin
作者单位	1.Shandong Univ, Shandong, Peoples R China 2.Univ Washington, Seattle, WA 98195 USA 3.Chinese Acad Sci, Inst Oceanol, Beijing, Peoples R China
推荐引用方式 GB/T 7714	Xing, Yu,Zhou, Yu,Yan, Xin,et al. Shell thickening for extrusion-based ceramics printing[J]. COMPUTERS & GRAPHICS-UK,2021,97:160-169.
APA	Xing, Yu.,Zhou, Yu.,Yan, Xin.,Zhao, Haisen.,Liu, Wenqiang.,...&Lu, Lin.(2021).Shell thickening for extrusion-based ceramics printing.COMPUTERS & GRAPHICS-UK,97,160-169.
MLA	Xing, Yu,et al."Shell thickening for extrusion-based ceramics printing".COMPUTERS & GRAPHICS-UK 97(2021):160-169.

条目包含的文件
文件名称/大小	文献类型	版本类型	开放类型	使用许可
1-s2.0-S009784932100（3711KB）	期刊论文	出版稿	限制开放	CC BY-NC-SA	浏览