Institutional Repository of Key Laboratory of Marine Environmental Corrosion and Bio-fouling, IOCAS
Study on steel corrosion in different seabed sediments | |
Li, YT; Hou, BR | |
1999-12-01 | |
发表期刊 | BULLETIN OF MATERIALS SCIENCE |
ISSN | 0250-4707 |
卷号 | 22期号:7页码:1037-1040 |
文章类型 | Article |
摘要 | A series of simulation experiments on carbon steel (A(3) steel) and low alloy steel (16 Mn steel) in marine atmosphere (MA), seawater (SW) and seabed sediment (SBS) including rough sea sand, fine sea sand and seabed mud were carried out indoors for a year or so by means of individually hanging plates (IHP) and electrically connected hanging plates (ECHP). The corrosion of steels in SBS was mainly due to the macrogalvanic cell effect. The steel plates at the bottom of SBS, as the anode of a macrogalvanic cell, showed the heaviest corrosion with a corrosion rate of up to 0.12 mm/a, approximately equal to that of steel plates in marine atmosphere.; A series of simulation experiments on carbon steel (A(3) steel) and low alloy steel (16 Mn steel) in marine atmosphere (MA), seawater (SW) and seabed sediment (SBS) including rough sea sand, fine sea sand and seabed mud were carried out indoors for a year or so by means of individually hanging plates (IHP) and electrically connected hanging plates (ECHP). The corrosion of steels in SBS was mainly due to the macrogalvanic cell effect. The steel plates at the bottom of SBS, as the anode of a macrogalvanic cell, showed the heaviest corrosion with a corrosion rate of up to 0.12 mm/a, approximately equal to that of steel plates in marine atmosphere. The test results showed that the corrosion rates of A(3) and 16 Mn steel in marine environment were in the order: MA > SW > SBS by the IHP method; and MA > SBS > SW by the ECHP method. The corrosion rates of steels in the water/sediment interface were directly proportional to the grain size of the SBS by the ECHP method, but those of steels in the water/sediment interface did not vary with the grain size of SBS by the IHP method. The corrosion rate of low-alloy steel was a little higher than that of carbon steel. The results of this study have important applications for design of offshore steel structures such as oil platform, pier, and port. |
关键词 | Seabed Sediment Steel Corrosion Behaviour |
学科领域 | Materials Science, Multidisciplinary |
收录类别 | SCI |
语种 | 英语 |
WOS记录号 | WOS:000084488600004 |
引用统计 | |
文献类型 | 期刊论文 |
条目标识符 | http://ir.qdio.ac.cn/handle/337002/2354 |
专题 | 海洋环境腐蚀与生物污损重点实验室 |
作者单位 | Chinese Acad Sci, Inst Oceanol, Qingdao 266071, Peoples R China |
推荐引用方式 GB/T 7714 | Li, YT,Hou, BR. Study on steel corrosion in different seabed sediments[J]. BULLETIN OF MATERIALS SCIENCE,1999,22(7):1037-1040. |
APA | Li, YT,&Hou, BR.(1999).Study on steel corrosion in different seabed sediments.BULLETIN OF MATERIALS SCIENCE,22(7),1037-1040. |
MLA | Li, YT,et al."Study on steel corrosion in different seabed sediments".BULLETIN OF MATERIALS SCIENCE 22.7(1999):1037-1040. |
条目包含的文件 | ||||||
文件名称/大小 | 文献类型 | 版本类型 | 开放类型 | 使用许可 | ||
li-Study on steel.pd(300KB) | 限制开放 | -- | 浏览 |
个性服务 |
推荐该条目 |
保存到收藏夹 |
查看访问统计 |
导出为Endnote文件 |
谷歌学术 |
谷歌学术中相似的文章 |
[Li, YT]的文章 |
[Hou, BR]的文章 |
百度学术 |
百度学术中相似的文章 |
[Li, YT]的文章 |
[Hou, BR]的文章 |
必应学术 |
必应学术中相似的文章 |
[Li, YT]的文章 |
[Hou, BR]的文章 |
相关权益政策 |
暂无数据 |
收藏/分享 |
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。
修改评论