A general approach to determine texture patterns using pole figure

doi:10.1016/j.jmrt.2021.07.062

	A general approach to determine texture patterns using pole figure
	Fu, Junwei 1,2
	2021-09-01
发表期刊	JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T
ISSN	2238-7854
卷号	14 页码:1284-1291
通讯作者	Fu, Junwei([email protected])
摘要	In the present work, a general and simple approach to determine texture patterns using pole figure was developed. For the rolled materials, the rolling plane can be determined by the ratio of OP/R in the given pole figure. Here, OP is the length from the center to an arbitrary pole in the pole figure, and R is the radius of the projection circle in the pole figure. Rolling direction for the rolled materials or the extrusion direction for the extruded materials can be directly calculated using the coordinate values of the poles in the given pole figure. For cubic and hexagonal materials, the calculated results using the developed approach are in agreement with the standard stereographic projection pole figures. The textures in the rolled and annealed Fe-17Cr ferritic stainless steel and extruded Mg-2Mn alloy were examined by electron backscatter diffraction and X-ray diffraction. The proposed approach was applied to determine texture patterns in the above two materials. It was found that {111}<112> type of gamma-fiber texture develops for the as-annealed Fe-17Cr ferritic stainless steel and <0001> + <10-10> double fiber texture develops for the extruded Mg-2Mn alloy. (C) 2021 The Author(s). Published by Elsevier B.V.
关键词	Texture Pole figure Electron backscatter diffraction Ferritic stainless steel Magnesium alloy
DOI	10.1016/j.jmrt.2021.07.062
收录类别	SCI
语种	英语
资助项目	Na-tional Natural Science Foundation of China[51571081]
WOS研究方向	Materials Science ; Metallurgy & Metallurgical Engineering
WOS类目	Materials Science, Multidisciplinary ; Metallurgy & Metallurgical Engineering
WOS记录号	WOS:000704008500003
出版者	ELSEVIER
引用统计	被引频次：8[WOS] [WOS记录] [WOS相关记录]
文献类型	期刊论文
条目标识符	http://ir.qdio.ac.cn/handle/337002/176566
专题	海洋环境腐蚀与生物污损重点实验室
通讯作者	Fu, Junwei
作者单位	1.Chinese Acad Sci, Inst Oceanol, Key Lab Marine Environm Corros & Biofouling, Qingdao 266071, Peoples R China 2.Hefei Univ Technol, Sch Mat Sci & Engn, Hefei 230009, Peoples R China
第一作者单位	中国科学院海洋研究所
通讯作者单位	中国科学院海洋研究所
推荐引用方式 GB/T 7714	Fu, Junwei. A general approach to determine texture patterns using pole figure[J]. JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T,2021,14:1284-1291.
APA	Fu, Junwei.(2021).A general approach to determine texture patterns using pole figure.JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T,14,1284-1291.
MLA	Fu, Junwei."A general approach to determine texture patterns using pole figure".JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T 14(2021):1284-1291.

条目包含的文件
文件名称/大小	文献类型	版本类型	开放类型	使用许可
1-s2.0-S223878542100（1290KB）	期刊论文	出版稿	限制开放	CC BY-NC-SA	浏览