Institutional Repository of Key Laboratory of Marine Environmental Corrosion and Bio-fouling, IOCAS
Effect of anti-corrosive performance, roughness and chemical composition of pre-treatment layer on the overall performance of the paint system on cold-rolled steel | |
Gao, Xiang1; Li, Weihua1,2; Ma, Houyi3 | |
2017-11-25 | |
发表期刊 | SURFACE & COATINGS TECHNOLOGY |
卷号 | 329页码:19-28 |
文章类型 | Article |
摘要 | Many fundamental researches about the effect of some basic properties of a pre-treatment layer, such as anti-corrosive performance, surface roughness and chemical composition on the overall performance of paint systems were investigated. Three kinds of pre-treatment layers: bare polyacrylic acid (PAA) layer, Mo based layer and Mo doped PAA layer were deposited on cold-rolled steel surfaces through immersing the steel samples in the corresponding solution. The electrochemical measurements results indicated that after been treated in PAA solution, the steels became vulnerable to corrosion and the Mo based layer and Mo doped PAA layer could improve the corrosion resistance of steel to a certain degree. The values of root-mean-square roughness of the bare steel, bare PAA layer, Mo based layer and Mo doped PAA layer were 15.0 nm, 11.3 nm, 13.0 run and 59.1 nm, respectively. The corresponding values of arithmetic average roughness of the samples were 16.9 nm, 10.5 nm, 9.1 nm and 41.0 nm, respectively. The spectroscopy results indicated that the surface of the bare PAA and Mo doped PAA layer covered steels contained abundant COON groups and the composition of Mo based layer covered steel surface was mainly oxides. According to the impact test and neutral salt spray test results, the corrosion mitigation performance, microstructure and chemical composition of the pre-treatment layer could all affect the overall performance of the paint system. All the results indicated that the anti-corrosive performance was not the only index, the microstructure and chemical composition also needed to be considered in the development of a new generation pre-treatment layer. |
关键词 | Pre-treatment Layer Polyacrylic Acid Corrosion Resistance Adhesion Paint System |
DOI | 10.1016/j.surfcoat.2017.09.029 |
收录类别 | SCI |
语种 | 英语 |
WOS记录号 | WOS:000414115300003 |
引用统计 | |
文献类型 | 期刊论文 |
版本 | 出版稿 |
条目标识符 | http://ir.qdio.ac.cn/handle/337002/143052 |
专题 | 海洋环境腐蚀与生物污损重点实验室 |
作者单位 | 1.Chinese Acad Sci, Inst Oceanol, Key Lab Marine Environm Corros & Biofouling, Qingdao 266071, Peoples R China 2.Qingdao Technol Univ, Cooperat Innovat Ctr Engn Construct & Safety Shan, Qingdao 266033, Peoples R China 3.Shandong Univ, Sch Chem & Chem Engn, State Educ Minist, Key Lab Colloid & Interface Chem, Jinan 250100, Shandong, Peoples R China |
第一作者单位 | 中国科学院海洋研究所 |
推荐引用方式 GB/T 7714 | Gao, Xiang,Li, Weihua,Ma, Houyi. Effect of anti-corrosive performance, roughness and chemical composition of pre-treatment layer on the overall performance of the paint system on cold-rolled steel[J]. SURFACE & COATINGS TECHNOLOGY,2017,329:19-28. |
APA | Gao, Xiang,Li, Weihua,&Ma, Houyi.(2017).Effect of anti-corrosive performance, roughness and chemical composition of pre-treatment layer on the overall performance of the paint system on cold-rolled steel.SURFACE & COATINGS TECHNOLOGY,329,19-28. |
MLA | Gao, Xiang,et al."Effect of anti-corrosive performance, roughness and chemical composition of pre-treatment layer on the overall performance of the paint system on cold-rolled steel".SURFACE & COATINGS TECHNOLOGY 329(2017):19-28. |
条目包含的文件 | ||||||
文件名称/大小 | 文献类型 | 版本类型 | 开放类型 | 使用许可 | ||
Effect of anti-corro(1532KB) | 期刊论文 | 出版稿 | 限制开放 | CC BY-NC-SA | 浏览 |
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。
修改评论