| Fabrication of Slippery Lubricant-Infused Porous Surface with High Underwater Transparency for the Control of Marine Biofouling | |
Wang, Peng1,3 ; Zhang, Dun1; Sun, Shimei1,2; Li, Tianping1,2; Sun, Yan1
| |
| 2017-01-11 | |
| 发表期刊 | ACS APPLIED MATERIALS & INTERFACES
 |
| 卷号 | 9期号:1页码:972-982 |
| 文章类型 | Article |
| 摘要 | Marine optical instruments are bearing serious biofouling problem, which affects the accuracy of data collected. To solve the biofouling problem of marine optical instruments, a novel instance of slippery lubricant-infused porous surface (SLIPS) with high underwater-transparency was designed over glass substrate via infusing lubricant into its porous microstructure fabricated with hydrothermal method. The advantage of SLIPS as antibiofouling strategy to marine optical instruments was proven by comparing its underwater optical and antibiofouling performances with three kinds of samples (hydrophilic glass sample, textured hydrophilic glass sample, and superhydrophobic glass sample). The modification of SLIPS enhances the underwater-transparency of glass sample within the wavelength of 500-800 nm, for the infusion of lubricant with lower refractive index than glass substrate. In contrast with hydrophilic surface, textured hydrophilic surface and superhydrophobic surface, SLIPS can significantly inhibit bacterial and algal settlements, thereby maintaining high underwater transparency in both dynamic and static seawater. The inhibition of bacterial and algal settlements over SLIPS results from its liquid-like property. The contact angle hysteresis of water over SLIPS increases with immersion time in seawater under different conditions (static, dynamic, and vibration conditions). Both dynamic and vibration conditions accelerate the failure of SLIPS exposed in seawater. This research provides valuable information for solving biofouling problem of marine optical instruments with SLIPS. |
| 关键词 | Slippery Lubricant-infused Porous Surfaces Antibiofouling Settlement Under-water Transparency Marine Optical Windows |
| DOI | 10.1021/acsami.6b09117 |
| 收录类别 | SCI |
| 语种 | 英语 |
| WOS记录号 | WOS:000392037400112 |
| 引用统计 | |
| 文献类型 | 期刊论文 |
| 版本 | 出版稿 |
| 条目标识符 | http://ir.qdio.ac.cn/handle/337002/136287 |
| 专题 | 研究生部 海洋环境腐蚀与生物污损重点实验室 |
| 作者单位 | 1.Chinese Acad Sci, Inst Oceanol, Key Lab Marine Environm Corros & Biofouling, 7 Naihai Rd, Qingdao 266071, Peoples R China 2.Univ Chinese Acad Sci, 19 Jia Yuquan Rd, Beijing 100039, Peoples R China 3.Luoyang Ship Mat Res Inst, State Key Lab Marine Corros & Protect, Qingdao 266101, Peoples R China |
| 第一作者单位 | 中国科学院海洋研究所 |
| 推荐引用方式 GB/T 7714 | Wang, Peng,Zhang, Dun,Sun, Shimei,et al. Fabrication of Slippery Lubricant-Infused Porous Surface with High Underwater Transparency for the Control of Marine Biofouling[J]. ACS APPLIED MATERIALS & INTERFACES,2017,9(1):972-982. |
| APA | Wang, Peng,Zhang, Dun,Sun, Shimei,Li, Tianping,&Sun, Yan.(2017).Fabrication of Slippery Lubricant-Infused Porous Surface with High Underwater Transparency for the Control of Marine Biofouling.ACS APPLIED MATERIALS & INTERFACES,9(1),972-982. |
| MLA | Wang, Peng,et al."Fabrication of Slippery Lubricant-Infused Porous Surface with High Underwater Transparency for the Control of Marine Biofouling".ACS APPLIED MATERIALS & INTERFACES 9.1(2017):972-982. |
| 条目包含的文件 | ||||||
| 文件名称/大小 | 文献类型 | 版本类型 | 开放类型 | 使用许可 | ||
| Fabrication of Slipp（5045KB） | 期刊论文 | 出版稿 | 限制开放 | CC BY-NC-SA | 浏览 | |
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。
修改评论